MJ Smart WaterJet

Advantages of Water Jet Cutting

 

Cold cutting process: Abrasive Water Jet cutting do not produce any heat affected zones and the maximum temperature at the nozzle while piercing is found to be 50°C and is quiet less while cutting. 

Environment Friendly: With Water and sand as cutting medium, no hazardous wastes are generated and the cutting process is environmental friendly. 

High Thickness Cutting: Abrasive Water Jet can cut upto 250 mm Stainless Steel; 250 mm Aluminium; 300 mm Titanium. 
High Accuracy: Water Jet cutting machines can cut material with a positional accuracy of +/- 0.03 mm. 

The indicated value refer to a measured length of 1000 m at RT 20 C +1 C according to VDI/DGQ3441.         

                    

Machine Virtually can cut any 2D shape: Abrasive Water Jet can cut any 2 dimensional profile from most of the material.

High Edge Quality: Leaves a satin smooth finish thus reduces secondary operations.

Minimal or no fixtures required: As the force of the water jet is vertically down, no fixtures are required for most of the material due to negligible side forces. Thin sheets may require some weight to be placed.

Saves Raw Material: When machining or roughing out expensive materials such as titanium, the scrap still has a high value. This is because they will give chunks, not chips. It is possible to get moreparts from the same material because of the abrasive jets low kerf width.